| Directional pattern: |
Supercardioid |
| Principle of operation: |
Pressure gradient |
| Cartridge type: |
Pre-polarized condenser |
| Frequency range: |
20 Hz - 20 kHz |
|
Frequency range,
± 2 dB, at 20 cm (7.9 in):
|
80 Hz - 15 kHz with 2 dB soft boost at 10-12 kHz |
|
Sensitivity, nominal,
±3 dB at 1 kHz:
|
6 mV/Pa; -44 dB re. 1 V/Pa |
|
Equivalent noise level,
A-weighted:
|
Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A)) |
|
S/N ratio (A-weighted),
re. 1 kHz at 1 Pa (94 dB SPL):
|
Typ. 71 dB(A) |
|
Total harmonic distortion
(THD):
|
< 1% up to 123 dB SPL peak |
| Dynamic range: |
Typ. 100 dB |
|
Max. SPL, peak
before clipping:
|
142 dB |
| Output impedance: |
From MicroDot: 30 - 40 Ω. From DAD4099/DAD6001-BC: 100 Ω |
| Cable drive capability: |
Up to 300 m (984 ft) with DAD4099 or DAD6001-BC XLR Adapter |
| Output balance principle: |
Signal balanced with DAD4099 or DAD6001-BC XLR Adapter |
| Common mode rejection ratio (CMRR): |
> 60 dB from 50 Hz to 15 kHz with DAD4099 or DAD6001-BC XLR Adapter |
|
Power supply
(for full performance):
|
Min. 5 V to max. 50 V through DPA adapter for wireless systems |
| Current consumption: |
Typ. 1.5 mA (microphone). 3.5 mA with DAD4099 or DAD6001-BC XLR Adapter |
| Connector: |
MicroDot |
| Color: |
Black |
| Weight: |
33 g (1.16 oz) |
| Microphone diameter: |
5.4 mm (0.21 in) |
| Microphone length: |
45 mm (1.8 in) |
| Cable length: |
1.8 m (5.9 ft) |
| Cable diameter: |
1.6 mm (0.06 in) / 2.2 mm (0.09 in) |
| Polarity: |
+V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099 or DAD6001-BC XLR adapter) |
| Temperature range: |
-40°C to 45°C (-40°F to 113°F) |
| Relative humidity (RH): |
Up to 90% |
|
Maximum opening
mounting clip:
|
35 mm |
| Gooseneck length: |
140 mm (5.5 in) |
